MOVIDRIVE^® device status for safety encoders with MOVLINK® DDI

The MOVISAFE^® CS..A safety options with firmware 5.0x support the use of safety encoders with MOVILINK^® DDI. The safety encoders are supported by the MOVIDRIVE^® modular/system/technology application inverters starting from firmware 11. A minimum value in the device status is also required. The minimum values are listed in the following table at the status-relevant position.

The device status can be found on the inverter's system nameplate.

• MOVIDRIVE® system (MDX9.A..-S00) device status
• MOVIDRIVE® system CiA402 (MDX9.A..-E00) device status