P881 SBus address

P881 SBus address

Setting range: 0 – 63

P881 lets you set the system address of the MOVITRAC^® B unit. This address enables the MOVITRAC^® B to communicate, for example, with PC, PLC or MOVIDRIVE^® via the system bus.

With FSE24B, the address is set to "0".

On delivery, the MOVITRAC^® B address is always set to "0". SEW-EURODRIVE recommends not using address "0", in order to prevent data transfer collisions when serial communication is used with several inverters.

For FSC12B, the setting via the DIP switch has priority.