Explanation of the parameters
If there are several options, the factory setting is underlined.
The parameters for motor startup are described in chapter "Startup with the FGB keypad" .
You can select the parameters on the FBG11B keypad as follows:
| Selection in the FBG11B long menu |
| Selection in the FBG11B short and long menus |
| Direct selection in the FBG11B keypad and in the FBG11B long menu |
| Selection within FGB motor startup |
The following symbols explain the parameters:
| These parameters are switch-selectable and available in parameter sets 1 and 2. |
| These parameters can only be changed in inverter status "INHIBITED" (= output stage at high resistance). |
| The startup function automatically changes this parameter. |
Additional information
- Parameter group 0.. Display value
- Parameter group 1.. Setpoints/ramp generators
- Parameter group 2.. Controller parameters
- Parameter group 3.. Motor parameters
- Parameter group 4.. Reference signals
- Parameter group 5.. Monitoring functions
- Parameter group 6.. Terminal assignment
- Parameter group 7.. Control functions
- Parameter group 8.. Device functions
- Parameter group 9.. IPOS parameters
