P872 Setpoint description PO3
P872 Setpoint description PO3
No function
You can use P873 – P875 to define the content of process input data words PI1 – PI3. This definition is necessary so MOVITRAC® B can allocate the appropriate actual values.
The following PI assignments are available:
Assignment | Description |
|---|---|
0 / No function | The content of the process input data word is 0000hex |
1 / Actual speed | Current speed actual value of the drive in rpm |
2 / output current | Momentary active current of the inverter in % of IN. |
3 / Active current | Momentary output current of the inverter in % of IN |
6 / Status word 1 | Status information of the inverter |
7 / Status word 2 | Status information of the inverter |
8 / Actual speed % | Momentary actual speed value in % of P302 |
9 / IPOS® PI data | IPOS® process input data |
10 / PI controller actual value % | Actual value of the PI controller |
