P302 / P312 Maximum speed 1 / 2

P302 / P312 Maximum speed 1 / 2

Setting range: 0 – 1500 – 5500 rpm

No setpoint greater than the value set here can be selected. If you set n_min > n_max, then the value set in n_max applies to the minimum speed and the maximum speed.

In VFC and VFC + DC BRAKING operating mode, you may enter the following maximum speed values depending on the number of poles:

Fault F08 speed monitoring might be indicated when you enter higher values.

When you perform a startup, the unit automatically sets the maximum speed to the transition speed.