P301 / P311 Minimum speed 1 / 2

P301 / P311 Minimum speed 1 / 2

Setting range: 0 – 15 – 5500 rpm

This speed is the lower limit that may not be exceeded even when zero is selected as the setpoint. The minimum speed also applies when n_min < n_start/stop was set.

Important:

• If the hoist function is active, the slowest speed is 15 rpm even if n_min has been set to a lower value.
• When using the "simple positioning" application module and the "hardware limit switch" function, moving clear of the limit switch must be possible even at slow speeds. This function is not active when the hardware limit switch is hit at n_min.