DIP switch S3/2: Motor connection type

You can select the connection type of asynchronous motors at this DIP switch. When selecting synchronous motors, the switch does not have any function.

• OFF (S3/2 = OFF): Use this setting to select the connection type of asynchronous motors ☆.
• ON (S3/2 = ON): Use this setting to select the connection type of asynchronous motors △.

If the motor connection type is changed via DIP switch S3/2, the motor connection type via DIP switch D3/3 and S3/4 must be checked and adapted if necessary, see chapter "Detailed motor selection table for startup via DIP switch S3".