DIP switch S3/1: Brake type

Use this DIP switch to select the brake type of the motor.

• OFF (S3/1 = OFF): Use this setting to select the standard brake.
• This setting corresponds to the brake type that is automatically assigned to the motor type.See chapter "Detailed motor selection table for startup via DIP switch S3".
• ON (S3/1 = ON): Use this setting to select the optional brake.
• This setting corresponds to the brake type that is optionally assigned to the motor type.

If no brake specified in the motor selection tables matches the brake in the existing motor, start up the drive train using the MOVISUITE^® engineering software. Startup via DIP switch S3 is not possible.