Transfer to stock
During the storage process, the box is transported on the belt toward the end of the belt. At the same time, the telescope is moved in the storage direction. As soon as the telescope has reached the set synchronous point ("belt end"), the telescope and belt have the same speed and the box is transferred from the belt to the telescope. As soon as the box has left the belt, the belt is stopped with the specified "Belt stop distance". The telescope continues to move to the set absolute position.
The following figure illustrates this process:
As a prerequisite for starting the storage process, the position on the belt of the box to be transferred to stock and the distance of the telescope to the end of the belt must correspond to the set configuration parameters. The box is then transferred to stock using the application-specific parameters and the start command.
