Installation via OMW CFast memory card

  1. Disconnect the MOVI-C® CONTROLLER from the voltage supply.
  2. Remove the OMW CFast memory card from the XM2 card slot of the MOVI-C® CONTROLLER.
  3. Insert the OMW CFast memory card into an appropriate card reader and connect it to your engineering PC.
  4. Copy the downloaded Visualization installation file to the OMW CFast memory card. Select a target directory without user-specific access restrictions (e.g. C:\Users\sew\Downloads\).
  5. Remove the OMW CFast memory card from the card reader and insert it back into the XM2 card slot of the MOVI-C® CONTROLLER.
  6. Connect the MOVI-C® CONTROLLER to the voltage supply.
    • The Windows operating system is started on the MOVI-C® CONTROLLER.
  7. Open the directory into which you copied the downloaded installation file of the Visualization and perform the installation as described in chapter Via Remote Desktop access, starting from step 2.