Assembling/disassembling the inverter

Assembling the inverter

• Screw the screw [1] into the mounting plate of the control cabinet, but do not tighten it.
• Align the lower slotted hole of the base plate with the screw [1] and lower it into position.
• Push the inverter backwards so that the screw [3] can be inserted through the upper slotted hole in the base plate [2].
• Tighten the retaining screws [1] and [2].

Disassembling the inverter

To disassemble the inverter, perform the assembly steps in reverse order.