Binary control

The RS485 address set at DIP switches S1/1 – S1/4 is 0.

• S2/4 = "OFF"
• The speed monitoring time 2 is set at switch t1.
• The speed monitoring times 1 and 3 are fixed to 1 s.
• The ramp time is set to 1 s.
• Setpoint f2 is set as switch f2.
• S2/4 = "ON"
• The speed monitoring time 2 is set at switch f2.
• The speed monitoring times 1 and 3 are fixed to 1 s.
• The setpoint is set to 5 Hz.
• The ramp time is set at switch t1.