Hybrid cable connection
The following table shows the conductor assignment of the hybrid cables with part numbers 01867423 and 08179484 and the corresponding motor terminals of the motor DR..:
Motor terminal motor DR.. | Wire color/hybrid cable designation |
|---|---|
U1 | Black/U1 |
V1 | Black/V1 |
W1 | Black/W1 |
4a | Red/13 |
3a | White/14 |
5a | Blue/15 |
1b | Black/1 |
2b | Black/2 |
PE connection | Green/yellow + shield end (inner shield) |
The following figure shows how to connect the hybrid cable to the terminal box of the DR.. motor:
INFORMATION
Do not install an external brake rectifier with brakemotors.
With brakemotors, the MOVIMOT® inverter controls the brake directly.
NOTICE
Damage to the drive due to a ground fault.
Damage to property
- During installation, avoid conductive connections between the motor output and the ground potential.
- During installation, avoid conductive connections between the brake output and the ground potential.
