Fault 23 Power section
Fault: 23.4 (1704hex | 5892dec) Description: Hardware fault | ||
|---|---|---|
| Response: Output stage inhibit | |
Cause | Measure | |
A fault was detected on a component of the power section. | – Check for short circuit/ground fault at the inverter output. – Reduce the line capacitance at the inverter output. – If the error occurs repeatedly, contact SEW-EURODRIVE Service. | |
Fault detected on switched-mode power supply. | Check the DC 24 V supply voltage. | |
Error detected at the gate driver of a power semiconductor. | Contact SEW-EURODRIVE Service. | |
