Fault 7 DC link

Fault: 7.1 (0701hex \| 1793dec) Description: DC link overvoltage
	Response: Output stage inhibit
Cause	Measure
Maximum permitted DC link voltage exceeded.	– Check the connection of the braking resistor. – Reduce the deceleration. – Check the project planning for the braking resistor (resistance value).

Fault: 7.1 (0701hex | 1793dec)

Description: DC link overvoltage

Response: Output stage inhibit

Cause

Measure

Maximum permitted DC link voltage exceeded.

– Check the connection of the braking resistor.

– Reduce the deceleration.

– Check the project planning for the braking resistor (resistance value).

MOVIONE®