Installing the inverter

Mount the inverter as follows:

  1. WARNING! Risk of burns due to hot surfaces. Severe injury. Let the device cool down sufficiently before touching it.
  2. NOTICE! Loss of the guaranteed degree of protection. Possible damage to property. When the inverter is removed from the connection box, the inverter and the wiring space must be protected from humidity, dust, and foreign particles.
  3. Place the inverter on the connection box. Make sure not to tilt the inverter.
  1. Screw the inverter onto the connection box with 4 screws. Tighten the screws step by step in diametrically opposite sequence.
    • Tightening torque: 6.0 Nm