System bus and module bus cables
The RJ45 connectors of the system bus and module bus cables, the connectors that are preassembled in the field, and the sockets in the application inverters were tested by SEW‑EURODRIVE for mechanical stability and contact reliability. SEW‑EURODRIVE recommends using the system bus and module bus cables listed below. If other cables and connectors are used, SEW‑EURODRIVE makes no statement about the quality of the plug-in connection.
NOTICE
Use of the wrong cables.
Damage to the application inverter.
Only 4-pin cables are permitted for use as system bus cables [2]. If an 8-pin cable is used, malfunctions or failures may occur at the connected devices.
Additional information
