Measures for thermal project planning

The following table provides information to find solutions if, during the thermal project planning for a BE.. brake (also for ATEX, IECEx, and HazLoc-NA®), the result of the respective test is negative during the project planning process.

Checks

Formula

Possible measures

Effective speed of the brake critical?

4.2

  • Apply the brake for break sections with position control.
  • Increase the motor speed by increasing the gear unit ratio.
  • Use forced cooling fan.

Cyclic duration factor of brake permitted?

4.4

  • Apply the brake for break sections with position control.
  • Adjust the travel cycle to achieve shorter break times with released brake.
  • Use forced cooling fan.