.K8./.K9. nameplate - Baumer

The following figure shows an example of a nameplate for a Baumer encoder. For the structure of the type designation, refer to chapter Type designation for encoders from SEW‑EURODRIVE.

[1]

Serial number

[2]

Type designation

[3]

Part number from SEW-EURODRIVE

[4]

Version

[5]

Manufacturing date in ww/yyyy format

[6]

QR code

[7]

Identifications relating to explosion protection

[8]

SEW‑EURODRIVE part number

For encoders with 1 part number on the nameplate

Part number of the encoder set (consisting of encoder and mount-on parts with the lower part of the integrated encoder plug connector)

For encoders with 2 part numbers on the nameplate

Part number of the encoder (without torque bracket and mount-on parts).

1st part number [8] + version [4] (listed above):

  • Manufacturer-specific part number of the encoder.

2nd part number [3] (listed below):

  • Manufacturer-neutral part number of the encoder. This part number lists encoders from both manufacturers without any specific sorting.

For additional information, see chapter Manufacturer information about conical encoders and chapter Spare parts.