Meaning of fault response

The fault "overcurrent at brake output" also produces a fault response. If this fault occurs, a released brake is applied by the brake module. If the brake is already applied, the brake module prevents the brake from being released. Control of the brake via the digital inputs SBC and DB00 is prevented. The brake module locks itself.

After rectifying the fault, you can unlock the brake module by switching the DC 24 V control cable (SBC or DB00) off and back on again. You can then switch the brake again in the usual manner.

INFORMATION

• The disconnection and locking of the brake module due to the fault response must not be considered safety-relevant.
• Safe disconnection of the brake must always be performed by the safety relay at the safe digital input SBC_P/_M.