Startup notes

Perform the following steps before startup:

  1. WARNING! Electric shock caused by dangerous voltages in the connection area. Severe or fatal injuries. De-energize the device. Observe the 5 safety rules in the chapter "Performing electrical work safely". Then wait at least 5 minutes.
  2. WARNING! Risk of burns due to hot surfaces. Severe injuries. Let the device cool sufficiently before touching it.
  3. WARNING! Faulty device behavior due to incorrect device setting. Severe or fatal injuries. Observe the following information.
    • Always have the installation carried out by trained specialists.
    • Only use settings that are correct for the function.
  4. NOTICE! Failing to observe the minimum switch-off time of the line contactor can cause material damage. Irreparable damage to the inverter or unforeseen malfunctions. After switching off the voltage supply, keep it switched off for at least 10 s.
    • Do not switch the voltage supply on or off more often than once per minute.
  5. Install the protective covers of the system according to the instructions. This will avoid injuries.
    • Never start the device if the protective covers are not installed.
Additional information