Parameter group 13. / 14. speed ramps 1 / 2

The ramp times refer to a setpoint change of Δn = 3000 rpm. The ramps t11 /  t21 up and t11 / t21 down are effective when the setpoint is changed. The stop ramp t13/t23 is in effect when the enable is withdrawn by pressing the STOP/RESET key or via the terminals.

• P130 / P140 ramp t11 / t21 up
• P131 / P141 ramp t11 / t21 down
• P134 / P144 ramp t12 / t22 up = down
• P135 / P145 S pattern t12 / t22
• P136 / P146 stop ramp 13 / t23 up = down
• P139 / P149 Ramp monitoring 1 / 2