Requirements

• The supply units used are suitable for single-point parallel connection, see chapter Approved device types for single-point parallel connection.
• The type designation of all supply units used matches.
• All supply units of the network are installed correctly both mechanically and electrically.
• The digital inputs and outputs of the supply units are correctly wired.
• The synchronization signal is wired correctly and the terminating resistors are installed.
• The supply units of the network are interconnected via SBus. This simplifies startup.
• The system and connected drives must be configured correctly.
• Safety measures prevent accidental startup of the drive.
• Safety measures prevent hazards to people and machines.