General information
Safety notes
Product description
Technical data
Project planning for inverter
Project planning for functional safety
Device structure
Mechanical installation
Electrical installation
Startup
Parameters
Operation
Fieldbus mode
Service
Address list
General information
loading...
Safety notes
loading...
Product description
loading...
Technical data
loading...
Project planning for inverter
loading...
Project planning for functional safety
loading...
Device structure
loading...
Mechanical installation
loading...
Electrical installation
loading...
Startup
loading...
Parameters
loading...
Operation
loading...
Fieldbus mode
General information
Connecting a gateway or controller (SBus MOVILINK®)
Modbus RTU
CANopen
General information
Structure and settings of process data words
Communication example
Parameter settings for the inverter
Connecting the signal terminals at the inverter
Setup of a network for CANopen/SBus/Modbus RTU
Structure and settings of process data words
loading...
Setup of a network for CANopen/SBus/Modbus RTU
Cable length
Connecting a gateway or controller (SBus MOVILINK®)
loading...
Modbus RTU
loading...
CANopen
loading...
Service
loading...
Cable length
The permitted total cable length depends on the baud rate set in parameter
P5-02
:
125 kBd: 500 m (1640 ft)
250 kBd: 250 m (820 ft)
500 kBd: 100 m (328 ft)
1000 kBd: 25 m (82 ft)
❮
❯
MOVITRAC® LTP-B
Language
Deutsch
English
Español
Français
Brasileiro
SEW-EURODRIVE
Home
Fieldbus mode
General information
Setup of a network for CANopen/SBus/Modbus RTU
Cable length