Fixation of Ethernet cables in connection box (X42/X43)

Make sure that the Ethernet cables are strain-relieved and pressure-relieved after connection.

Mounting

Mount the enclosed retaining bracket as follows:

  1. Loosen the screw according to the following figure:
  2. Mount the enclosed retaining bracket with the previously loosened screw according to the following figure (tightening torque 2 Nm):
  3. Route the Ethernet cables into the connection box in such a way that the cables can be fixed with the retaining bracket.
  4. Fasten the Ethernet cables to the retaining bracket according to the following figure:

The retaining bracket is only used for mechanical fixation. The Ethernet cable is therefore fixed to the retaining bracket with the sheath.

Order information

Type

Image

Content

Part number

Retaining bracket for Ethernet cable in connection box
for strain/pressure relief
of plug connectors X42/X43

1 pieces

28308123