Configuring the devices of the MOVI‑C® modular automation system in MOVISUITE®
Startup is described in detail by way of an example. In the example, a MOVI-C® CONTROLLER progressive UHX65A-R is integrated into the following network: .
The startup of the other controllers in the MOVI‑C® modular automation system is performed in the same way.
Additional information
- Establishing the network connection
- Scanning the network for devices
- Adding devices to MOVISUITE®
- Configuring the drive train
- Starting up the MOVIKIT® software module
- Configuring the fieldbus card
- Creating an IEC project
- Setting the IP address in the IEC Editor
- Performing fieldbus diagnostics in the IEC Editor
