Automatic
"Rotary knife" function in automatic mode with linear curve profile in the cutting area. When the operating mode is started, adjustment to the generated curve is performed.
The modulo direction for adjustment can be selected as follows using control bits 4 and 5 of the control word:
PD 1:4 – Jog positive | PD 1:5 – Jog negative | Modulo direction |
|---|---|---|
TRUE | FALSE | CW |
FALSE | FALSE | SHORT |
TRUE | TRUE | SHORT |
FALSE | TRUE | CCW |
During motion, the curve can be recalculated by changing the parameters "Nominal product length" and "Synchronous angle". The changeover to the new curve is made as soon as the curve end of the previous curve has been reached. Depending on the curve profile, fast acceleration may occur at the transition between curves.
Additional information
