Startup requirements

The following requirements apply to startup:

  • You have installed the inverter correctly, both mechanically and electrically.
  • You have configured the inverter and connected drives correctly.
  • Safety measures prevent the drives from starting up unintentionally.
  • Safety precautions rule out hazards to people and machinery.

 

You can perform the startup procedure in various ways:

  • If you are using a power-adjusted motor, you can, depending on requirements, dispense with startup (operation without startup).
  • You can perform startup by means of a keypad or the MOVISUITE® engineering software.

 

  • Required hardware for startup with MOVISUITE® engineering software:
    • USM21A interface adapter (28231449), CDM11A diagnostic module (28265092) and serial interface cable RJ10 → d-sub-9 (18123864)
    • or
    • CBG11A/CBG21A keypad and USB cable A → Mini B (25643517)

Part number

Scope of delivery

28231449

  • USM21A interface adapter
  • Serial interface cable with 2 × RJ10 connectors
  • USB cable (A-B)

18123864

  • Serial interface cable RJ10 → D-sub -9

25643517

  • USB cable (A-B)