Line contactor

NOTICE

Damage to the MOVIMOT® inverter when using the line contactor for jog mode.
Damage to the MOVIMOT® inverter.
  • Do not use the line contactor for jog mode, but only for switching the inverter on and off.
  • Observe a minimum switch-off time of 2 s for the line contactor.
  • Use only a contactor of utilization category AC3 (EN 60947-4-1) as a line contactor.

Recommendation when using an external 24 V supply: To avoid transient issues when switching on, there should be at least 2 seconds between activation of the 24 V supply and grid.