Installation notes

INFORMATION

You must observe the general safety notes.

WARNING

Improper assembly/disassembly of MOVIMOT® drives and add-on parts.
Risk of injury.
  • You must observe the information regarding installation and disassembly.
  • Before releasing any shaft connections, make sure there is no active torque on the shaft (tension within the system).

WARNING

Risk of injury due to unintentional start-up of the drive and danger due to electrical voltage.
Dangerous voltages may still be present for up to 1 minute after disconnection from the supply system.
  • Disconnect the MOVIMOT® drive from the power supply before you start working on the unit and secure it against unintentional reconnection to the voltage supply.
  • Secure the output shaft against rotation.
  • Wait for at least 1 minute before removing the MOVIMOT® inverter.
  • Comply with all instructions referring to the technical data and the permissible conditions where the unit is operated.
  • Only use the provided attachment options when mounting the MOVIMOT® drive.
  • Use only the mounting and locking elements that fit into the existing bores, threads, and countersinks.