Fastening the mounting brackets

1. Fasten the 2 mounting brackets [3] with 2 pan head screws each. Use the mid-left and lower left bore of the fastening plates [1] for this. Observe the maximum tightening torque of 3.2 Nm.

2. 

   

   [1]	Fastening plate (2×)
   [2]	MOVI-DPS® storage unit
   [3]	Mounting bracket (2×)

3. Fasten 2 additional mounting brackets [3] with 2 pan head screws each. Use the mid-right and upper right bore of the fastening plates [1] for this. Observe the maximum tightening torque of 3.2 Nm.

[1]	Fastening plate (2×)
[2]	MOVI-DPS® storage unit
[3]	Mounting bracket (2×)