Brake control
For technical data of the SBM safe brake module, refer to chapter SBM safe brake module.
Supported brakes | BD1B brake control | DC 24 V brake controlBMV5 brake control |
|---|---|---|
Brake types | Brakemotors from SEW-EURODRIVE with a two or three-wire brake, e.g. BE.., BZ.. | Brakemotors from SEW-EURODRIVE with a two-wire brake (DC), e.g. BP.., BK.. Three-wire brake not permitted |
Third-party motors with a two or three-wire brake | Third-party motors with a two-wire brake (DC) Three-wire brake not permitted | |
Nominal voltage of the brake | AC 230 V, AC 400 V, or AC 460 V | DC 24 V |
Brake holding current IH
| DC 1.2 A at 230 V | Max. 3.0 A
|
DC 0.7 A at 400 V | ||
DC 0.6 A at 460 V | ||
Acceleration current | Depending on the brake type, 4 – 8.5 times the holding current (for 200 ms) | – |
