Inspection and maintenance intervals
INFORMATION
Wear times are influenced by many factors and can be short. The required intervals for inspection and maintenance must be individually calculated by the system manufacturer in accordance with the project planning documents.
The following factors can shorten the inspection and maintenance intervals:
- Particularly high number of switching cycles with high motor acceleration
- Especially high cyclic duration factor at high rotational speed
- Changing direction of rotation (reversing operation)
- Vertical mounting positions and pivoted mounting positions
- High inertia forces due to the motion of the drive, e.g. in mobile drives or drives subject to high impact and vibration load
- Application-related retrodriving torques or torsional vibrations
- External environmental influences, such as moisture, high degree of UV exposure, very high or low ambient temperatures.
Additional information
