Output shaft as a hollow shaft with keyway /..A
The hollow shaft is equipped with a keyway according to DIN 6885/T1.
The following is included in the scope of delivery:
- Protective cover [2]
- Retaining screws [1] or
- 2 retaining rings
The protective cover is dust-tight. The standard sealing system is therefore generally used on the side of the safety cover.
For detailed information on the geometry of the machine shaft, refer to chapter Hollow shaft with keyway /..A. Dimension L14 refers to the length of the load bearing key.
With a continuous machine shaft, the gear unit is delivered without end plate and protective cover. In this case, both gear unit sides are designed with the same sealing system.
