Output shaft as a hollow shaft with shrink disk /..H
The shrink disk is positioned on the opposite side of the machine shaft.
The following is included in the scope of delivery:
- Shrink disk [2] and protective cover [3]
- Endplate with retaining screws [1] or
- 2 retaining rings
The protective cover is dust-tight. The standard sealing system is therefore generally used on the side of the safety cover.
For detailed information on the geometry of the machine shaft, refer to chapter Hollow shaft with shrink disk /..H.
With a continuous machine shaft, the gear unit is delivered without end plate and protective cover. In this case, both gear unit sides are designed with the same sealing system.
