Procedure

NOTICE

Faulty oil filling may result in damage to the gear unit.
Possible damage to the gear unit.
  • The oil may only be filled into the gear unit at the marked screw plug [1]. This ensures that the bearings are lubricated during the initial startup and after an oil change.

  1. Remove the oil fill plug [1].
  2. Fill in the oil via the oil fill opening [2].
  • The oil quantity specified on the nameplate is an approximate quantity. The markings on the oil dipstick are the decisive indicator of the correct oil quantity, see chapter Checking the oil level.
  • Use a clean filling aid without zinc coating (plastic funnel or similar).
  1. CAUTION! Danger due to leakage of lubricant. Possible risk of slipping. Immediately remove any oil that has escaped with oil binder.
  1. Screw the oil fill plug [1] and the oil dipstick back into place.