Hoist gear units

Parallel-shaft gear units are often used in hoist systems in which the rope drum and motor are arranged on the same side of the gear unit.

Due to the larger center distance, the X../HC hoist series for the torque range of 12.8 to 175 kNm offers significant advantages to the crane designer when designing the system: optimized gear unit size selection with reduced gear unit weight and, at the same time, sufficient center distance. Furthermore, our X.. series is designed for a torque range of 6.8 to 500 kNm.

Project planning with finite fatigue strength and design for load spectrums with defined service life or crane categorization according to relevant standards such as DIN 13001, FEM 1.001, or DIN 15020 are possible.

For detailed information, refer to the technical brochure "Technology for cranes".