Installing the gear unit
WARNING
Danger due to insufficient attachment options on the part of the operator.
Severe or fatal injuries.
- Make sure that there are sufficient and suitable attachment options for the gear unit at the operator's machine before mounting the gear unit to the operator's machine.
NOTICE
An improper foundation may result in damage to the gear unit.
Possible damage to property.
- The foundation must be level and flat.
- The gear unit must not be deformed when tightening the retaining screws.
- Correctly compensate for unevenness.
- Observe the weight information on the nameplate.
Tighten the retaining screws or nuts with the prescribed tightening torque. Use the screws and tightening torques specified in chapter Tightening torques: Recommendations for gear unit mounting with foot-mounted design.
Do not change the mounting position of the gear unit without prior consultation with SEW‑EURODRIVE. The warranty will become void without prior consultation.
Additional information
- Permitted deviation of the mounting position during installation
- Tightening torques: Recommendations for gear unit mounting with foot-mounted design
- Tightening torques: Recommendations for retaining screws of gear unit mount-on parts
- Gear unit mounting with foot-mounted design and fan with universal fan guard
- Aligning the shaft axis
