Gear unit with universal housing /HU and EBD
- Remove the protection cap [1] to allow the excess old grease to escape.
- Remove the protection cap [2]. Apply moderate pressure to refill the following amount of grease at the grease nipple [3].
Size | Amount of grease in g |
|---|---|
X140 | 120 |
X150 | 140 |
X160 | 180 |
X170 | 180 |
X180 | 220 |
X190 | 220 |
X200 | 400 |
X210 | 400 |
- Place the protection cap [2] on the grease nipple [3].
- Attach the protection cap [1].
