Registration via NFC interface

  • You have mounted the module to the required inverter.
  • You have switched on the inverter.
  • You have activated the Bluetooth® interface of your mobile device.
  • You have activated the NFC interface of your mobile device.
  1. Open the IoT app on the mobile device and log in.
  2. In device management, click [Add product].
  3. Select the NFC scan function:
  4. Hold the mobile device next to the NFC interface of the module.
    • The password is read out automatically, the device is synchronized and the data is loaded.
  • The module is logged in to the IoT app.
  • The IoT app can communicate with the inverter.
  • In device management, the symbol of the inverter is displayed with the module.
  • Connections with modules that have already been logged in are established automatically as soon as you select the inverter with the module in device management.
    INFORMATION: If you use the web app, IoT App Connect must also be open to establish connections that have already been set up.

INFORMATION

SEW-EURODRIVE recommends that you set your own password after logging in. Assign the password in the IoT app via the context menu of the module. For further information, refer to chapter Password.