Wall mounting CBM22A/K-20

The CBM22A/K-2.0 wall mounting is used to mount the CBG11A, CBG21A, or CBG22A keypads.

With the integrated key switch, you can activate the functions in conjunction with the CBG22A local keypad (e.g. manual mode).

For connecting to the X4142 engineering interface of the device, the CBM22A/K-2.0 wall mounting has a connection cable with an M12 connector (see the following figure).

Technical data CBM22A/K-2.0

Compatible devices

(only in combination with X4142
engineering interface)

  • MOVIMOT® flexible
  • MOVIMOT® advanced
  • MOVIMOT® performance
  • MOVIGEAR® performance

Part number

28282892

Scope of delivery

  • CBM22A/K‑2.0
  • Connection cable 2 m

Bending radius of connection cable

Minimum 20 mm (4 × cable diameter)

Connection

M12 plug connector, 5-pin, male, B‑coded

Protection class

IP65 with tightening torque of cover screw 1.2 – 1.4 Nm

Dimensions (H × W × D)

  • Closed: 230 × 81 × 71 mm
  • Open: 350 × 81 × 71 mm
  • With inserted key: 230 × 81 × 85 mm

Installation distance, front flap

min. 200 mm