Limit values for standard gear units (R, F, K, S, W series)
The values MaNotaus and FRaNotaus correspond to the permitted buffer torques MP and buffer transverse forces FRP of the gear units.
The emergency off torque MP is defined as follows:
For service factors |
| : |
|
For service factors |
| : |
|
For the values for factor fNotaus for various gear unit designs, refer to the following table:
Gear unit design | fNotaus |
|---|---|
HK., HS., HW. | 1.7 |
R..7, F..7, K..7, S..7 | 1.7 |
K..9 | 1.7 |
S..7p | Depending on the gear ratio, on request |
W10 | 1.3 |
W20/30 | 1.5 |
W..7 | 1.4 |
W..9 | Depending on the gear ratio, on request |
The emergency off lateral force FRP is defined as follows:
Both the emergency off torque MP and the emergency off lateral force FRP are limited to 1000 events.
