Operating mode

Parameter group

Description

Operating mode

Operating mode selection:

  • Bidirectional – The drive can be moved in positive and negative direction of movement in feed-in/feed-out mode.
  • Unidirectional positive direction of movement – In feed-in/feed-out mode, the drive can only be moved in positive direction of movement. In jog mode, both directions are possible.
  • Unidirectional negative direction of movement – In feed-in/feed-out mode, the drive can only be moved in negative direction of movement. In jog mode, both directions are possible.

Use of sensor pair A/B

INFORMATION: The parameter is displayed if an unidirectional operating mode is set.

Specify whether a second sensor pair is used. Optionally, rapid/creep speed positioning can then be performed on sensor pair A or B.

A corresponding selection is made via the setpoint application mode.