Configuring the digital inputs/digital outputs

[1]

Selection of a default assignment for the digital inputs.

The digital inputs are the image of the digital inputs of the connected inverter and are provided by process data word PI 5.

• Freely configurable – Configure digital inputs as required using the drop-down lists under [2].
• If a different default assignment was selected before and the "Freely configurable" setting has only been specified after that, the assigned functions of the default assignment are retained in the corresponding fields and the drop-down lists are unlocked to change the function.
• Yes, without HW limit switches – Use default assignment for applications without hardware limit switches.
• Yes, with HW limit switches – Use default assignment for applications with hardware limit switches.
• No function – Do not assign any function to the digital inputs DI 01 to DI 07.

[2]

List of digital inputs with drop-down lists for assigning a function and displaying the physical level of the input.

Digital input DI 00 is permanently assigned the "output stage enable" function.

[3]

Selection of a default assignment for the digital outputs.

• Freely configurable – Configure digital outputs as required using the drop-down lists under [4].
• If a different default assignment was selected before and the "Freely configurable" setting has only been specified after that, the assigned functions of the default assignment are retained in the corresponding fields and the drop-down lists are unlocked to change the function.
• Control via fieldbus – Digital outputs can be controlled via process data word PO 5.
• Digital outputs as in delivery state – Reset assignment of digital outputs to delivery state (see chapter Default assignment of digital outputs).

[4]

List of digital outputs with drop-down lists for assigning a function and displaying the physical level.

Digital output DB 00 is permanently assigned the "brake output" function.