Connecting EI7C FS – with M12 plug connector

NOTICE

Improperly carried out work on drives with functionally safe motor options.
Loss of the safety function.
  • Improperly carried out work on drives with functionally safe motor options can result in loss of the safety functions. This can cause injuries and damage.
  • Only qualified specialists are allowed to carry out work on drives with functionally safe motor options.
  • For EK8Z, EK9Z, AK8Z safety encoders, work on the MOVILINK® DDI communication unit is not permitted. Place an order with SEW-EURODRIVE Service to have any necessary work on the encoder performed.
  • With the EI7C FS built-in encoder, no work may be performed on the encoder. Place an order with SEW-EURODRIVE Service to have any necessary work on the encoder performed.
  • When using an encoder mounting adapter to retrofit a safety encoder, the retrofitting of the FS motor option is not identifiable on the motor, e.g. by the FS logo on the motor nameplate. If retrofitting of a safety encoder is performed by the user, the user accepts responsibility and liability. Retrofitting by SEW-EURODRIVE Service is recommended.

For further information, refer to the wiring diagrams in chapter Overview of wiring diagrams.