Error 110 MOVIKIT® – Communication
Error: 110.64 (6E40hex | 28224dec) Description: Parameter request error | ||
|---|---|---|
|
| |
Cause | Measure | |
Internal fault | Contact SEW-EURODRIVE Service. | |
Error detected during parameter request of controller to inverter. | Check whether the parameter to be read/written is present in the inverter. | |
Error: 110.65 (6E41hex | 28225dec) Description: Error responding to parameter request | ||
|---|---|---|
|
| |
Cause | Measure | |
Error detected in response of inverter to parameter request of controller. | Contact SEW-EURODRIVE Service. | |
Error: 110.66 (6E42hex | 28226dec) Description: Link of logical device missing | ||
|---|---|---|
|
| |
Cause | Measure | |
No reference to device (logical device) passed to software function. | Transfer the logical device to the software function. | |
