MOVITRANS® spot
With MOVITRANS® spot, the line cable is structured in a point-shaped form as a planar coil in the form of a so-called field plate. The pick-up supplies the application with energy via the field plate. To do this, the pick-up converts the energy into a DC voltage. Field plates can be set in the floor or installed on the floor.
The MOVITRANS® spot TDM80E110-D06-B03-... pick-up with direct connection with a nominal power of 10 kW (for 4 min) or 1.25 kW for 100% cdf is available for the mobile unit. The pick-up has an SBusPLUS communication interface via which the device can be controlled in voltage, current and power. MOVITRANS® spot can be set with the MOVI-DPS® EXK22A energy interface and energy storage units.
[1] | Field plate in the ground |
[2] | Mobile consumer with pick-up and energy storage unit |
