Connecting a supply cable

  • Required material: Accessories SCM-Z-001, part number: 28284089 (included in the scope of delivery)
  • Required tool: Torx-10, Torx-20, and Torx-25 screwdrivers

    [1]

    M3 screw (2 ×)

    [4]

    Prefabricated cable with M5 cable lug

    [2]

    Protective cover

    [5]

    Prefabricated cable with M4 cable lug

    [3]

    Copper rails (2 ×)

     

     

  1. Loosen 2 x M3 screws. Remove the protective cover.
  2. Screw the prefabricated cables with the cable lugs onto the copper rails. The copper rails are marked with + and -. For further information, refer to chapter Electrical connections.
  3. Re-install the protective cover. Tighten the protective cover.
  4. When installing several devices next to one another, connect the devices with suitable copper rails. For further information, refer to chapter Mechanical installation.