Reference signals
Parameter group | Description |
|---|---|
Comparison of setpoint/actual speed values | |
Half window width | Hysteresis around the speed setpoint |
Index: 8324.3 | |
Delay time
| Delay time for the comparison of setpoint and actual value. The condition for the signal must be fulfilled at least for this time for the signal to be set. |
Index: 8324.4 | |
Polarity
| Specifies when the signal is issued.
|
Index: 8324.5 | |
In position | |
Window width | If the difference between actual and setpoint positions is less than or equal to half this value, the "In position" signal is set. |
Index: 8331.1 | |
IEC name: - | |
Hysteresis | Target position hysteresis. If the window width is exceeded, the "In position" signal remains set until this value is exceeded. |
Index: 8331.2 | |
IEC name: - | |
Actual target position in user units | Actual target position in user units |
Index: 8331.3 | |
IEC name: - | |
