Device description file

INFORMATION

A modified device description file can cause malfunctions in the device.
Do not change or expand entries in the device description file. SEW‑EURODRIVE assumes no liability for malfunctions of the device caused by a modified device description file.

A requirement for proper device configuration with the fieldbus interface is that the matching device description file () is used in the engineering tool of the controller. The file contains all the relevant data for engineering and for the data exchange of the device.

The current version of the device description file is available on the homepage of SEW‑EURODRIVE (www.sew-eurodrive.com). Search for "EDS file" on the [Online Support] > [Data & Documents] > [Software] page.

The following table shows the names of the device description files of the individual devices:

Device

Device description file

MOVI‑C® CONTROLLER
standard UHX25A‑E

SEW MOVI-C CONTROLLER UHX25A.eds

MOVI‑C® CONTROLLER
advanced UHX45A‑E

SEW MOVI-C CONTROLLER UHX45A.eds

MOVI‑C® CONTROLLER
progressive UHX65A‑R

SEW_UHX65A.eds

MOVI-C® CONTROLLER
power UHX85‑R

SEW_UHX85A.eds

MOVI‑C® FIELD CONTROLLER
standard MFC1../FHX25‑E

SEW MOVI-C CONTROLLER FHX25A.eds

MOVI‑C® FIELD CONTROLLER
advanced MFC1../FHX45‑E

SEW MOVI-C CONTROLLER UHX45A.eds